IV bag forming filling sealing production line / I

IV bag forming filling and sealling production line IV bag production line Infusion bag production line LONGEM Non-PVC IV bag form-fill-seal machine is developed based on the advanced technology and experiences of domestic and abroad. Main components of this machine are all international top brands, which guarantee the good performance of the machine. Feature: PLC control with great function and perfect performance is adopted All the parameters can be set up on the colorful touch screen control system Mass flow meter filling system is adopted to guarantee the high accuracy and large range of filling It is easy to change the moulds and film, which can meet the requirement of large quantity production Powerful intelligent control system can achieve the following function: nonconforming products are rejected automatically, alarm when any of the parameter is out of the setting, the machine will automatically stop when there is any error. The technology of color printing, computer heat printing, nitrogen filling and multi-room bag can be applied on the machine. IV Solution Specification Basic IV Solution liquid Port Type All kinds of boat, round and abnormal shape port Film Size Standard film with inner diameter of 6 inch, outer diameter ≤600mm,current in market Printing Standard thermal transfer film with inner diameter of 3 inch, outer diameter ≤140mm, current in market Bag Size 50ml, 100ml, 250ml, 500ml, 1000ml Voltage 3x380V; 50HZ Compressed air Pressure ≥0.7Mpa, if pressure is too low, machine will automatically stop running and give alarm. Filtering precision is 5μm (Grade 3,3,5) Clean compressed air filtering precision is 0.22μm Grade 1,2,1 Cooling water 0.5kg/cm2, temperature≤ 15 Room requirement Temperature is in the range of 20 24, average humidity is in the range of 50%-65% Bag quantity in each station 1 2 3 4 6 8 Max. Capacity 1200 bags/h 2500 bags/h 3500 bags/h 5000 bags/h 7500 bags/h 10000 bags/h